29.3. and 1.4. we are closed.

Carbine 416 (SA-H11 ONE™) - BALCK

Length: 715 - 820 mm Weight: 3000 g Material: Zinc and Aluminium Alloy, Steel, Polymer Muzzle Velocity: ~410 FPS / ~310 FPS Quick Spring Change System Enter & Convert™ SA-H11 assault rifle replica by Specna Arms is made largely from a...
Length: 715 - 820 mm Weight: 3000 g Material: Zinc and Aluminium Alloy, Steel, Polymer Muzzle Velocity: ~410 FPS / ~310 FPS Quick Spring Change System Enter & Convert™ SA-H11 assault rifle replica by Specna Arms is made largely from a uniform zinc and aluminium alloy,   reinforced with steel elements   in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). Both the stock storing the battery and the pistol grip were made from polymer. The receiver of the replica and RIS handguard have undergone the process of anodizing, which guarantees high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the same process prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. The receiver bears manufacturer markings. The replica’s parts   fit very well together   - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost not noticeable once the replica has been shouldered. The replica features a quick spring release system, so-called   Enter & Convert™ . Due to that system it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring change lasts literally seconds. The advantages of Enter & Convert™ system are   hard to overstate . In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the user a varied set of possibilities and much freedom. Enter & Convert™ system allows with minimal amount of time change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between effectiveness of fire and safety for the user himself as well as other participants. The replica is   fully compatible with LiPo and LiFe batteries . Due to base muzzle velocity of ~430 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows to reduce the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations. The gearbox which is reinforced on the height of the cylinder’s head hides a steel main spring guide which is the element of the Enter & Convert™ system and also 8mm ball bearings and steel thread-wheels which are placed on spacers. The system is secured with the use of four anti-reversals. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking. The replica is equipped with a 22mm top RIS rail, RIS handguard and an adjustable stock. The top RIS rail features metal flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad it is possible to adapt the replica’s length to the body type and preferences of the user. Standard flash hider is based on 14 mm left-hand thread, which allows the attachment of a silencer in its place. The set includes an adapter that extends the barrel and features the same thread as the flash hider. In order to enhance the realism of the game, the replica also features an   ambidextrous,  operational bolt-catch   mechanism, as well as   ambidextrous   fire seletor and magazine release button. The replica comes with a   steel, 300 BB's , Hi-Cap magazine. Specna Arms replica are compatible with many magazines available on the market, from manufacturers like: - BOYI - SRC - King Arms - MAG - STAR - ACM The set does not include the battery nor charger. The set includes: - replica - magazine - fixed iron sights - additional main spring - cleaning rod ATTENTION: According to report number HKGEC1600157401, the product meets the requirements of European Union RoHS - Restriction of Hazardous Substances 2011/65/EU directive annex II as well as 2002/95/EC amending directive   that concerns the limitation of dangerous substances in electronics. Which means that Specna Arms free from harmful materials such as: - lead - mercury - cadmium - hexavalent chromium - polybrominated biphenyl (PBB) - polybrominated diphenyl ether (PBDE)
More

324,67 € tax incl.

Availability: In Stock

2 Items

SPARMS057

: Specna Arms

By buying this product you can collect up to 79 points.
View loyalty points rules.


Varianty produktů

Length: 715 - 820 mm
Weight: 3000 g
Material: Zinc and Aluminium Alloy, Steel, Polymer
Muzzle Velocity: ~410 FPS / ~310 FPS
Quick Spring Change System Enter & Convert™

SA-H11 assault rifle replica by Specna Arms is made largely from a uniform zinc and aluminium alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). Both the stock storing the battery and the pistol grip were made from polymer. The receiver of the replica and RIS handguard have undergone the process of anodizing, which guarantees high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the same process prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. The receiver bears manufacturer markings.

The replica’s parts fit very well together - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost not noticeable once the replica has been shouldered.

The replica features a quick spring release system, so-called Enter & Convert™. Due to that system it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring change lasts literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the user a varied set of possibilities and much freedom. Enter & Convert™ system allows with minimal amount of time change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between effectiveness of fire and safety for the user himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to base muzzle velocity of ~430 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows to reduce the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations.

The gearbox which is reinforced on the height of the cylinder’s head hides a steel main spring guide which is the element of the Enter & Convert™ system and also 8mm ball bearings and steel thread-wheels which are placed on spacers. The system is secured with the use of four anti-reversals. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.


The replica is equipped with a 22mm top RIS rail, RIS handguard and an adjustable stock. The top RIS rail features metal flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad it is possible to adapt the replica’s length to the body type and preferences of the user. Standard flash hider is based on 14 mm left-hand thread, which allows the attachment of a silencer in its place. The set includes an adapter that extends the barrel and features the same thread as the flash hider.

In order to enhance the realism of the game, the replica also features an ambidextrous, operational bolt-catch mechanism, as well as ambidextrous fire seletor and magazine release button.

The replica comes with a steel, 300 BB's, Hi-Cap magazine.

Specna Arms replica are compatible with many magazines available on the market, from manufacturers like:

- BOYI
- SRC
- King Arms
- MAG
- STAR
- ACM

The set does not include the battery nor charger.

The set includes:

- replica
- magazine
- fixed iron sights
- additional main spring
- cleaning rod

ATTENTION:

According to report number HKGEC1600157401,

the product meets the requirements of European Union RoHS - Restriction of Hazardous Substances 2011/65/EU directive annex II as well as 2002/95/EC amending directive 
that concerns the limitation of dangerous substances in electronics.

Which means that Specna Arms free from harmful materials such as:

- lead
- mercury
- cadmium
- hexavalent chromium
- polybrominated biphenyl (PBB)
- polybrominated diphenyl ether (PBDE)

ColorBlack
Muzzle velocity (m/s)115 (m/s)
Recommended weight of ammunition0,25g - 0,28g
Thread (mm)14- (mm)
Outer length MINIMAL (mm)715 (mm)
Outer length MAXIMAL (mm)820 (mm)
Inner barrel length (mm)290 (mm)
Weight (g)3000 (g)
Body/receiver materialMetal
Amount of piston teeth1
Bearings (mm)8 (mm)
Bearings (material)Metal
Hlava pístuPlastic
NozzlePlastic
Spring guideMetal
Hop-Up chamber materialPlastic
Connector typeSmall Tamyia
Magazine materialMetal
High-cap / Mid-capHigh-cap
Magazine capacity300
BlowbackNO
Battery includedNO
Battery ChargerNO