Specna Arms 8 mm steel ball bearings are designed for AEG gearboxes with 8mm bearing seats and gears with 3 mm diameter shafts. The steel construction with a ball bearing mechanism provides rotational support for the gear shafts. The package contains a complete set of 6 bearings required for fitting the three gears in a gearbox.

25+ years of proven equipment and accessories.
Warning: Last items in stock!
ASPARTS037
AirsoftParts bearing installation tool is a practical service tool for installing bearings into a gearbox. The duralumin construction reduces the risk of scratching the bearing surface during installation, while the circumferential grooves provide a secure grip and precise handling. A useful tool for building, repairing and upgrading AEG gearboxes.
SPARMS445
Specna Arms OBLIVION 18:1 gears made of durable 40Cr steel are a upgrade gear set for AEG gearboxes. The gears feature modified sector gear timing to reduce PME in high-speed builds, high hardness of individual components and a versatile 18:1 gear ratio suitable for both standard and high-stress setups.
This expert product description was prepared by the ANAREUS.cz expert team. All rights to this unique content are bound to the anareus.cz domain.Specna Arms ball bearings are replacement internal parts designed for AEG gearboxes with 8mm bearing holes. They support the shafts of gears and are designed for standard shafts with a diameter of 3 mm. The bearings are made of steel and use a ball bearing construction. The set contains a total of 6 pieces, providing a pair of bearings for each of the three gears in the gearbox. Before installation, it is important to check not only the outer diameter of the bearings but also the shaft diameter of the gears being used. This set requires 8mm bearing seats in the gearbox and 3mm gear shafts.
Unlike solid bushings, these bearings use a ball bearing mechanism to provide rotational support for the gear shafts inside the gearbox.
The bearings are designed for gearboxes with 8mm bearing seats. We recommend checking the dimensions of the original bearings before ordering.
The inner diameter is designed for gear shafts with a diameter of 3 mm. When combining parts from different manufacturers, make sure to check this dimension as well.
The bearings are made of steel and are intended as replacement or service parts for the drivetrain of an AEG.
The package contains 6 ball bearings, providing a pair for each of the three gears in a standard AEG gearbox.
Ball bearings contain moving balls, while bushings have a solid construction without balls or other moving parts. With a bushing, the gear shaft rotates directly against the smooth sliding surface of the bushing.
No. The gearbox must have holes designed for 8mm bearings. Gears with 3 mm diameter shafts must also be used.
A standard three-gear setup uses 6 bearings – two for each gear. The package therefore contains a complete set of 6 pieces.
| Bearings (mm) | 8 (mm) |
| Bearings (material) | Metal |
Subscribe to newsletter
...don't miss any special offer...