AirsoftParts Washer and Axial Bearing for Piston Heads | ANAREUS View larger

AirsoftParts Washer and Axial Bearing for Piston Heads

AirsoftParts ball bearing with nut for mounting under the piston head is a replacement set designed for servicing the piston assembly of airsoft AEGs. The axial ball bearing allows the spring to rotate more freely during compression, reducing unwanted twisting. The set also includes the corresponding nut and mounting screw.

3,76 € tax incl.

Anareus 25 let

25+ years of proven equipment and accessories.

Availability: In Stock at store

4 Items  

ASPARTS013

: AirsoftParts

Accessories

  • 12,64 € In Stock

    : AirsoftParts

    ASPARTS009

    AirsoftParts ULTRA LIGHT piston head is an extremely lightweight CNC-machined piston head made from TECAFORM (POM), weighing just 5.4 g. Its lightweight design with 9 front holes promotes effective O-ring sealing while reducing the moving mass of the piston assembly. It is designed for V2, V3 and V7 gearboxes with springs up to M130.

    12,64 €
    In Stock
    Add to cart
  • 12,64 € In Stock

    : AirsoftParts

    ASPARTS010

    AirsoftParts DURAL 2013 piston head is a durable CNC-machined piston head made from EN AW 6012 T6 duralumin, designed for V2, V3 and V7 gearboxes with springs up to M170. It features pressure-assisted sealing through 9 front holes, a guide O-ring for centering inside the cylinder and an axial ball bearing that allows the spring to rotate more freely...

    12,64 €
    In Stock
    Add to cart
  • 12,64 € In Stock

    : AirsoftParts

    ASPARTS012

    AirsoftParts TECAFORM 2013 piston head is a lightweight CNC-machined piston head made from TECAFORM (POM), weighing 8.7 g and designed for V2, V3 and V7 gearboxes with springs up to M150. It features 9 holes for pressure-assisted sealing, a guide O-ring for centering inside the cylinder, an axial ball bearing and a through-locking nut for secure mounting.

    12,64 €
    In Stock
    Add to cart

AirsoftParts Axial Ball Bearing With Nut for Piston Head

This expert product description was prepared by the ANAREUS.cz expert team. All rights to this unique content are tied to the anareus.cz domain.AirsoftParts ball bearing with nut and screw serves as a replacement part for the piston head in an AEG air seal system. The axial bearing is positioned on the rear of the piston head and allows the spring to rotate more freely around its longitudinal axis during compression. This reduces torsional stress generated during the spring's operating cycle and contributes to proper function. The set is suitable for servicing, replacing a damaged or worn bearing, or assembling a compatible piston head. Along with the bearing, the set also includes a nut and mounting screw, providing the components required for installation. Exact compatibility with specific piston heads is not specified in the source data, so it is advisable to check the dimensions and design of the original part before installation.

Key Features

Axial Ball Bearing

The bearing allows the spring to rotate more freely during compression and reduces unwanted torsional stress during its operating cycle.

Replacement Part for Piston Head

The set is designed as a service replacement for the bearing located beneath the piston head in a compatible AEG piston assembly.

Reduces Spring Twisting

The ability to rotate helps the spring release torsional stress generated during compression, supporting proper operation of the spring assembly.

Nut and Screw Included

Along with the axial bearing, you also receive the corresponding nut and mounting screw for installation beneath the piston head.

Practical Service Part

During servicing, it allows you to replace the bearing and its mounting components separately without purchasing a complete piston head if its body is still usable.

Technical Specifications

  • Type: Replacement axial ball bearing for piston head
  • Intended Assembly: AEG piston assembly
  • Design: Axial ball bearing
  • Accessories: Nut and mounting screw

Package Contents

  • 1× axial ball bearing
  • 1× nut
  • 1× screw

Frequently Asked Questions (FAQ)

What Is the Axial Bearing Under the Piston Head For?

The bearing allows the spring to rotate more freely during compression. This reduces torsional stress and unwanted twisting during its operating cycle.

Is Mounting Hardware Also Included?

Yes. Along with the axial ball bearing, the package includes a nut and mounting screw.

Is the Bearing Compatible With Every AEG Piston Head?

Universal compatibility is not specified in the source data. Before replacement, we therefore recommend comparing the design and dimensions of the original bearing, nut and screw with this replacement set.

Does the Entire Piston Head Need to Be Replaced When Replacing the Bearing?

If the compatible piston head itself is undamaged and the issue concerns only the bearing or its mounting components, servicing can be carried out by replacing this separate set.

Bearings (material)Metal