SA EASY LIPO CHARGER and Battery 11,1V 1000mAh, 20C - Stick (Buffer)

Specna Arms EASY LiPo Charger and 11.1V 1000mAh battery

This expert product description was prepared by the ANAREUS.cz expert team. All rights to this unique content are bound to the anareus.cz domain.The EASY set from Specna Arms offers a simple solution for beginners and advanced players looking for a charger and compatible 11.1V Li-Po battery in one package. The charger supports balanced charging of two-cell 7.4V (2S) and three-cell 11.1V (3S) Li-Po batteries and requires no complicated setup. The set includes an 11.1V Li-Po battery with a capacity of 1000 mAh and a T-Dean connector. The compact Buffer Stick design measuring 92 × 17 × 17 mm is intended primarily for limited space inside a buffer tube. It is therefore suitable, for example, for AR15 (M4, MK18), AR9 and other AEGs with wiring routed into the buffer tube, including some compact PDW stocks. We always recommend measuring the available battery space before ordering. The 11.1V voltage provides fast trigger response and a higher RoF, but also places greater stress on the electrical and mechanical parts of the gun. We therefore recommend this battery primarily for AEGs equipped with an ETU, processor unit or MOSFET. The 11.1V battery is not suitable for long-term use in guns with basic mechanical trigger contacts.

Key features

Technical specifications

• Manufacturer: Specna Arms
• Battery type: Li-Po
• Battery voltage: 11.1 V
• Number of cells: 3S
• Battery capacity: 1000 mAh
• Discharge rate: 20C
• Configuration: Buffer Stick
• Battery dimensions: 92 × 17 × 17 mm
• Connector: T-Dean
• Supported charger batteries: Li-Po 7.4V (2S) / 11.1V (3S)
• Charger input: 110–240 V AC
• Charger output: 800 mA
• Indicators: LED – red (charging) / green (charged)
• Set weight: 280 g

ANAREUS tip: The 92 × 17 × 17 mm dimensions make the battery a very compact Buffer Stick, but battery space can be considerably limited in PDW stocks. Before ordering, always measure the internal space of the buffer tube or battery compartment, including the space required for the wiring and T-Dean connector.

Package contents

• 1× Specna Arms EASY LiPo Charger
• 1× 11.1V / 1000mAh 20C Li-Po battery – Buffer Stick
• 1× power cable
• 1× user manual

Warnings

• The 11.1V battery is not intended for long-term use in guns with basic wiring and mechanical trigger contacts, where the higher electrical load causes contact arcing and burning.
• For a long service life of the gun, we recommend using the 11.1V battery primarily with models equipped with an ETU processor unit or MOSFET.
• Use the charger only for supported 2S and 3S Li-Po batteries and follow the enclosed instructions when charging.
• Do not leave the battery unattended while charging and ideally charge it inside a protective bag designed for Li-Po batteries.
• Do not use a mechanically damaged, swollen or otherwise deformed Li-Po battery.

Charging and maintenance instructions

• Operating the charger is very easy. Connect the charger's power cable to the mains and then connect the battery according to the instructions in the user manual.
• During charging, the red LED lights up. Once charging is complete, the indicator changes to green.
• Avoid deep discharge of the battery, as this can cause irreversible damage to the Li-Po cells.
• For longer-term storage, keep the battery at an appropriate storage charge and do not leave it fully charged or discharged for extended periods.
• Store it in a cool, dry place away from direct sunlight and extreme temperatures.
• Stop using the battery when the RoF or gun response drops significantly, or when the ETU unit indicates low battery voltage.
• Always disconnect the battery from the gun after the game.

Frequently asked questions from our store

Who is the EASY LiPo Charger set suitable for?

The set is suitable for beginners and advanced players who want a simple charger without unnecessary setup together with a compact 11.1V battery with a T-Dean connector.

What batteries can the EASY LiPo Charger charge?

The charger is designed for 7.4V (2S) and 11.1V (3S) Li-Po batteries and supports balanced charging.

How do I know when the battery is charged?

It's simple – a red LED lights up during charging and a green LED lights up once charging is complete. Just like a traffic light: wait for green.

What guns is the supplied Buffer Stick battery suitable for?

Thanks to its 92 × 17 × 17 mm dimensions, it is designed primarily for guns with the battery stored inside the buffer tube, such as AR15 (M4, MK18), AR9 and some compact models with PDW stocks. Battery compartment dimensions vary between individual guns, so we recommend measuring the available space before purchasing.

Can I use the 11.1V battery in a gun without a MOSFET or ETU?

For long-term use, we do not recommend it. The higher 11.1V voltage places greater stress on the electrical and mechanical parts of the gun and can cause arcing and burning of mechanical trigger contacts in basic wiring. We therefore recommend it primarily for AEGs with an ETU unit or MOSFET.

Do I need to buy another charger for this set?

No. The EASY LiPo Charger is included in the package and is also designed for the supplied 11.1V 3S Li-Po battery.

Can I also use the charger for Li-Ion batteries?

According to the supplied specifications, the EASY LiPo Charger is designed for 7.4V (2S) and 11.1V (3S) Li-Po batteries. For Li-Ion batteries, use a charger that explicitly states support for Li-Ion batteries.