No products
View larger 
SA STANDARD Steel Gear Set 18:1
Specna Arms STANDARD 18:1 steel gears are a complete set of 3 gears for TM-standard AEG gearboxes. Cast steel gears with an 18:1 ratio are the standard gear set used in Specna Arms airsoft guns. They are designed for builds with springs up to a maximum of M120, and the sector gear features a lug for a sector gear delayer.
Another product variants
Out stock
25+ years of proven equipment and accessories.
Accessories
10,57 € In StockSA Steel Ball Bearings – 8 mmSPARMS113
Specna Arms 8 mm steel ball bearings are designed for AEG gearboxes with 8mm bearing seats and gears with 3 mm diameter shafts. The steel construction with a ball bearing mechanism provides rotational support for the gear shafts. The package contains a complete set of 6 bearings required for fitting the three gears in a gearbox.
10,57 €Out of stock
5,07 € In StockSA Plain Steel Bushings – 8 mmSPARMS114
Specna Arms 8 mm steel bushings are designed for AEG gearboxes with 8mm bushing seats and gears with 3 mm diameter shafts. The steel construction provides solid support for the gear shafts. The package contains a complete set of 6 bushings required for fitting the three gears in a gearbox. We recommend lubricating them with PTFE grease.
5,07 €Out of stock
33,83 € In StockSA V2 QSC ONE™ Gearbox Shell with 8mm Bearings – BlackSPARMS178
Specna Arms V2 QSC ONE™ gearbox shell with 8mm bushings is a replacement metal shell designed primarily for Specna Arms ONE™ M4 / AR15 AEGs. The package includes 8mm steel bushings. The shell supports the Enter & Convert™ and SAEC™ quick spring change systems, but the specific long screw-in V2 SAEC™ spring guide and mounting screws are not included.
33,83 €Out of stock- SA PTFE Teflon Grease (50 g)
SPARMS440
Specna Arms PTFE grease in a practical 50 g package is a service lubricant for mechanically stressed parts of airsoft guns. It is particularly suitable for gearbox gears, piston racks and sliding surfaces. The PTFE additive reduces friction and wear while helping to ensure smooth operation of the mechanism.
6,77 €On the way
Specna Arms STANDARD 18:1 steel gears
Specna Arms STANDARD 18:1 is a complete set of cast steel gears for TM-standard AEG gearboxes. The 18:1 gear ratio is the standard configuration also used from the factory in Specna Arms airsoft guns. The set includes all 3 gears required for the gear mechanism of an AEG gearbox. It is therefore suitable as a replacement for the original gear set when repairing or servicing the gun. According to the intended use of this set, the cast construction is suitable for builds with springs up to a maximum of M120. The sector gear features holes for inserting magnets, allowing it to be adapted for certain electronic units that detect the position or movement of the gear, such as ARES EFCS and similar ETU systems. The magnet is not included.
Key features of Specna Arms 18:1 gears
Technical specifications
- Manufacturer: Specna Arms
- Type: Gear set for AEG
- Gear ratio: 18:1
- Material: Steel
- Manufacturing: Cast gears
- Compatibility: TM-standard AEG gearboxes
- Original use: Specna Arms AEGs (excluding series with CNC gears)
- Recommended maximum spring: M120
- Number of gears: 3
Package contents
- 1× bevel gear
- 1× spur gear
- 1× sector gear
Frequently asked questions from our store
What gear ratio do the Specna Arms gears have?
The set uses a standard 18:1 gear ratio. This is the standard gear set also used in Specna Arms AEGs.
What spring strength are the gears suitable for?
These cast steel gears are designed for builds with springs up to a maximum of M120.
Can the gears be used with an ETU?
The sector gear features holes for inserting magnets, allowing it to be adapted for certain ETU systems that use magnetic detection, such as ARES EFCS and similar solutions. Specific compatibility must always be verified according to the ETU being used.
| Variants | 18:1 (STANDARD) |
| Color | Silver |
| Body/receiver material | Metal |
| Počet kusů v balení | 3 |