No products
Gears and pads for airsoft guns
Best Seller in Category
1.Teflon Grease for AEG Gearbox
2.EPeS Shim set for AEG gears (set 32 pcs)
3.Shim Set - 20pcs
- 4,65 € In Stock
3,81 € In StockAirsoftPro Metal Sector Gear Delayer CamASPRO128
AirsoftPro Metal Sector Gear Delayer Chip is a simple upgrade part designed to extend the opening time of the hop-up chamber during the firing cycle. By keeping the nozzle in the rear position for longer, it can help improve BB feeding at high rates of fire or when using slower-feeding magazines. The chip is made of metal and is compatible with AEG...
3,81 €In Stock
2,96 € In StockRetroArms Delayer Chip (3 mm)6683
RetroArms Delayer Chip is designed for V2, V3 and M249 gearboxes and is installed on the sector gear between the axle and pin. It helps extend the time the hop-up chamber remains open and keeps the tappet plate in the rear position for longer, which can improve BB feeding at high rates of fire or when using weaker magazines. It is designed for axles with...
2,96 €In Stock- SA OBLIVION 18:1 Precision Steel Gear Set with Improved Timing
SPARMS445
Specna Arms OBLIVION 18:1 gears made of durable 40Cr steel are a upgrade gear set for AEG gearboxes. The gears feature modified sector gear timing to reduce PME in high-speed builds, high hardness of individual components and a versatile 18:1 gear ratio suitable for both standard and high-stress setups.
27,49 €In Stock - SA OBLIVION 16:1 Precision Steel Gear Set with Improved Timing
SPARMS446
Specna Arms OBLIVION 16:1 gears made of durable 40Cr steel are an upgrade gear set for AEG gearboxes. The gears feature modified sector gear timing to reduce PME in high-speed builds, high hardness of individual components and a versatile 16:1 gear ratio suitable for both standard and high-stress builds up to M130.
27,49 €In Stock - SA OBLIVION SR-25 18:1 Precision Steel Gear Set with Improved...
SPARMS447
Specna Arms OBLIVION SR-25 18:1 gears made of durable 40Cr steel are an upgrade gear set for AEG V2.5 and PSG-1 / L85 gearboxes. The gears feature modified sector gear timing to reduce PME in high-speed builds, high hardness of individual components and a versatile 18:1 gear ratio suitable for both standard and high-stress builds.
31,72 €In Stock 
75,70 € In StockRetroArms CNC Steel Gear Set PandoRA 20:1 (4mm)8001
RetroArms PandoRA 20:1 with 4 mm shafts is a set of CNC steel gears for upgraded AEG builds. All gears are machined from a single piece of steel, and the manufacturer tested them with an M210 spring. The reinforced 4 mm shafts require suitable bearings and shims with a 4 mm inner diameter.
75,70 €In Stock
59,16 € 75,70 € In Stock-22%RetroArms CNC Steel Gear Set PandoRA 10:1 (3mm)8009
RetroArms PandoRA 10:1 with 3mm axles is a set of CNC steel gears for upgraded AEG builds. All gears are machined from a single piece of steel and were tested by the manufacturer with an M210 spring. The standard 3mm axles are designed for conventional airsoft bushings or bearings and shims.
59,16 € 75,70 €In StockReduced price!
20,72 € In StockSpecna Arms CNC Gear Set 16:1SPARMS194
A set of gears made of steel using precision CNC machines. Ideal for tuning airsoft replicas.
20,72 €In Stock
5,07 € In StockRetroArms Shim Set INNOX 0,05mm (25 ks) – Ø 4 mm7224
RetroArms INOX 0.05 mm shims – Ø4 mm are precision service shims for adjusting gear clearance in an AEG gearbox. The stainless steel design with a thickness of just 0.05 mm allows very fine shimming, while the Ø4 mm hole is intended for gears with a 4mm shaft, such as RetroArms PandoRA. The package contains 25 shims.
5,07 €In Stock
75,70 € In StockRetroArms CNC Steel Gear Set PandoRA Short stroke 13:1 (3mm)8010
RetroArms PandoRA Short Stroke 13:1 with 3mm axles is a set of CNC steel gears for upgraded AEG builds. All gears are machined from a single piece of steel and were tested by the manufacturer with an M210 spring. The standard 3mm axles are designed for conventional airsoft bushings or bearings and shims. Short Stroke tooth removal from the sector gear...
75,70 €In Stock
65,55 € In StockASG ULTIMATE CNC Gear Set - Ratio 16.5:1: Ultimate
ULTIM095
CNC Gear Set by ASG ULTIMATE with 16.5:1 gear ratio. Designed for both, torque and speed AEG upgrade builds. Precision CNC-machined from steel for maximum strength and accuracy. Perfectly shaped gear teeth. Optimized hardness and smooth power transfer. Complete 3-gear set (bevel, spur and sector gear). 3 mm axle shafts.
65,55 €In Stock
10,57 € In Stock
29,18 € In StockSpecna Arms CNC Gear Set 18:1SPARMS198
A set of gears made of steel using precision CNC machines. Ideal for tuning airsoft replicas.
29,18 €In Stock
27,07 € In StockSpecna Arms CNC Gear Set 13:1SPARMS197
A set of gears made of steel using precision CNC machines. Ideal for tuning airsoft replicas.
27,07 €In Stock
20,72 € In StockSpecna Arms CNC Gear Set 14:1SPARMS196
A set of gears made of steel using precision CNC machines. Ideal for tuning airsoft replicas.
20,72 €In Stock
2,96 € In StockRetroArms Delayer Chip (4 mm)7707
RetroArms Delayer Chip is designed for V2, V3 and M249 gearboxes and is installed on the sector gear between the axle and pin. It helps extend the time the hop-up chamber remains open and keeps the tappet plate in the rear position for longer, which can improve BB feeding at high rates of fire or when using weaker magazines. It is designed for axles with...
2,96 €In Stock
2,54 € In Stock
49,01 € 78,24 € In Stock-37%ASG ULTIMATE CNC Gear Set - Ratio 12.5:1: Ultimate
ULTIM092
CNC Gear Set by ASG ULTIMATE with 12.5:1 gear ratio. Designed for high-speed AEG upgrade builds. Precision CNC-machined from steel for maximum strength and accuracy. Perfectly shaped gear teeth. Optimized hardness and smooth power transfer. Complete 3-gear set (bevel, spur and sector gear). 3 mm axle shafts.
49,01 € 78,24 €In StockReduced price!
1,90 € In Stock
5,88 € 15,22 € In Stock-61%- 4,19 € In Stock
- 4,23 € In StockEPeS Shim set for AEG gears (set 32 pcs)
: EPES
E365-SET
EPeS Shims are EPeS's solution to fixing improperly shimmed gears in AEG weapons! EPeS has prepared a pack of 32 shims, 0.1/0.2/0.3 and 0.5 mm (8 pcs from each size), for perfect gear shimming. This helps extend the lifespan of gears and the piston, quiet the weapon's operation, and improve your battery's endurance! No stress, be EPeS!
4,23 €In Stock 
2,33 € In StockEPeS Shim set 0,1mm for AEG gears (10pcs): EPES
E365-01
EPeS Shims are EPeS's solution to fixing improperly shimmed gears in AEG weapons! EPeS has prepared a pack of 10 shims, 0.1 mm each, for perfect gear shimming. This helps extend the lifespan of gears and the piston, quiet the weapon's operation, and improve your battery's endurance! No stress, be EPeS!
2,33 €In Stock
