The store will be closed on April 3 and 6
No products
Mounting and RIS rails for airsoft guns
Do you want to place optics, collimator, flashlight or PEQ box on your airsoft replica, but we have your preferred piece of equipment only in RIS variant? No problem! With the RIS mounting rails you can mount your pet any way you want and you don't have to worry about whether you have an M-Lok or a Keymod.
Best Seller in Category
1.AA Set of RIS Rails for AAP-01 GBB, 10 / 6 Slots (2 Pieces) - Black
2.Element QD Sling Swivel
3.AA AAP-01 Rear RIS Rail Red Dot Sight Mount - Black
- STRIKE HOMS-01 30mm Riflescope One-Piece Mount (1.93") - Black
STRIKE084
One-piece RIS scope mount HOMS-01 for 30 mm rifle scopes by STRIKE SYSTEMS® in black. High mount 1.93" (approx. 49 mm) for comfortable aiming even with a mask. Precisely CNC-machined mount made from aircraft-grade aluminum 6061-T6. Modern ergonomics and low weight. HOMS – High Optic Mounting System
45,62 €In Stock - 5KU ZEN A-1 Sling RIS Mount – Black
: 5KU
5KU51
Airsoft RIS sling mount 5KU ZEN A-1 (ZA-1) is a replica of the ZenitCo mount in black finish. The construction from CNC-machined aluminum ensures solid attachment to a RIS rail using 2 screws, so you do not have to worry about the mount coming loose even on heavier guns. The design fits best with eastern-style rifles such as AK, AKM, AK-74 and similar...
10,88 €In Stock - PTS Enhanced RIS Rail Section for KeyMod, 5 slots / 60 mm – Black
: PTS
PTS057
PTS Syndicate reinforced polymer RIS rail for KeyMod system in black is a rail with a length of 60 mm and 5 mounting slots designed for handguards with a KeyMod interface. It allows attachment of a flashlight, laser or other RIS accessories without the need to purchase special KeyMod mounts.
12,56 €In Stock 
3,35 € In StockWST Double Point to Single Point Sling QD Adapter – Black: Wosport
WOSP167
WoSport QD sling adapter from 2-point to 1-point in black finish allows quick configuration changes depending on the situation. A simple solution for switching between 2-point and 1-point carry without replacing your sling. QD sling swivel is required and must be purchased separately.
3,35 €In Stock
14,65 € In StockTM RIS Scope Mount for VSR-10MDM1007
Tokyo Marui original RIS Riflescope or Red Dot sight mount for VSR-10 is meticulously designed and crafted for easy installation specifically tailored to your firearm! Tokyo Marui sets the standard in the airsoft world, so with their accessories, you can rest assured it will always fit without modifications!
14,65 €In Stock
9,21 € In StockFMA CNC RIS Cable Management, Type B - Black: FMA
TB1427-B
CNC RIS Cable Organizer by FMA in black. Type B is designed to fit into the groove (slot) on a RIS rail. Allows for organized cable routing of tactical lights and PEQ boxes on the handguard. Made from CNC aluminum.
9,21 €In Stock
15,07 € In StockFMA Sling Mount for RIS Rail - Bronze: FMA
TB1195-DE
Sling Mount for RIS Rail by FMA in bronze (matte tan). Made of durable aluminum to ensure long-lasting performance. Designed to work with most standard 25mm slings. Allows quick conversion from a 1-point to a 2-point sling by easily clipping the sling to the mount.
15,07 €In Stock
2,39 € 3,77 € In Stock-37%
4,39 € 6,28 € In Stock-30%
6,28 € In Stock
14,23 € In StockMagpul AFG M-LOK Adapter Rail: MAGPUL
MAG014
If you wish to comfortably attach your AFG-2 to M-LOK hand guards use this original adapter from Magpul Industries Corp.
14,23 €In Stock
13,18 € 16,32 € In Stock-19%Magpul M-LOK to MOE Adapter Kit: MAGPUL
MAG015
Adapts M-LOK accessories to legacy MOE slots.
13,18 € 16,32 €In StockReduced price!
39,34 € In StockTactical Mount Base 25.4mm / 30mm - Black: Aim-O
AIMO084-BK
Black mounting rings that allow you to add a 25mm or 30mm tube diameter optic to your airsoft replica (using the included insert). The rings attach to the RIS rail using "quick-release" pawls.
39,34 €In Stock
41,43 € In StockTactical Top Rail Extended Mount Base 25.4mm / 30mm - Black: Aim-O
AIMO086-BK
Black mounting rings that allow you to add a 25mm or 30mm tube diameter optic to your airsoft replica (using the included insert). The rings attach to the RIS rail using "quick-release" pawls.
41,43 €In Stock
20,09 € In StockTri-Side Rail 25.4mm / 30mm Mount Rings - Black: Aim-O
AIMO088-BK
Two mounting rings for attaching optics with a tube diameter of 25mm or 30mm. Thanks to the RIS rails on the rings, you can mount extra equipment, for example a collimator on the ring. This creates a hybrid with which you can aim your target at distance and at close range.
20,09 €In Stock
6,28 € In StockElement 9 positions Adjustable Tactical Light Mount - Black: Element
ELEM0062-BK
Multi-position mounting for flashlights. Thanks to the practical feature of adjustability, you can set the flashlight in exactly the position that suits you best and does not get in the way at all. The mounting is made of high quality polycarbonate and is mounted on a RIS rail. It is available in black and sand finish.
6,28 €In Stock
27,20 € In StockM-LOK Cantilever Rail Polymer - Black: MAGPUL
MAG024
The M-LOK Polymer Cantilever Rail/Light Mount is a versatile accessory that can be used with all M-LOK mounting surfaces. It allows the attachment of various rail-mounted accessories such as lights and lasers. The mount has Picatinny slots that extend forward to improve ergonomics and optimize accessory positioning.
27,20 €In Stock
3,77 € In StockTactical Flashlight ring 22mm - BLACK: Wosport
WOSP65-BK
Additional multifunctional ring with a robust pocket clip for your flashlight with a diameter of 22 mm for tactical use of flashlights.
3,77 €In Stock
39,76 € In StockPTS Enhanced Sling Plate - QD for GBB M4: PTS
PTS045
The PTS Enhanced Sling Plate - QD is a sling plate made from a high strength steel that can withstand strong pulling forces in all directions. The built in QD cup is precision machined for dimensional consistency for compatibility with any high quality QD sling loop including the PTS Low Profile QD Sling Swivel.
39,76 €In Stock
31,39 € In StockFMA FR Battery clip on left in BK1: FENIX
MAGMNT3
Innovated metal magnetic mounting for quick attachment of flashlight (or other accessories) to the barrel of a long gun. Can be used with flashlights with a body diameter of 23 to 26 millimeters and a reflector diameter up to 70 millimeters. The flashlight attaches to the mount with a single screw that can be easily hand-tightened, so no tools are...
31,39 €In Stock
25,11 € In StockASG Metal RIS Rail M-RAIL for M-LOK, 7 Slots / 80 mm (2...: ASG
ASG245-8
Metal RIS Rail M-RAIL for M-LOK by ASG in black. Length of 80 mm, 7 slots. Universal mounting rail for M-LOK systems. Compatible with all 21mm RIS / Picatinny accessories. Precision metal construction for maximum durability.
25,11 €In Stock
25,11 € In StockTM Low-profile RIS Scope Mount for AEG HK MP5 / G3ALM1040
Tokyo Marui original RIS Scope or Red Dot sight mount for AEG H&K MP5 and G3 is meticulously designed and crafted for easy installation specifically tailored to your firearm! Tokyo Marui sets the standard in the airsoft world, so with their accessories, you can rest assured it will always fit without modifications! For AEG HK MP5 / G3 only!
25,11 €In Stock- 5,86 € In StockAA AAP-01 Rear RIS Rail Red Dot Sight Mount - Black
U01-006
Sight RIS Mount for Red Dot Sight by Action Army for AAP-01 pistol in black. Made from durable polymer. Installs in place of the rear sight. Ideal for red dot sights, tactical flashlights, or laser aiming modules. 20 mm RIS standard. Lightweight – only 10 grams.
5,86 €In Stock - 9,21 € In StockAA Set of RIS Rails for AAP-01 GBB, 10 / 6 Slots (2 Pieces) -...
U01-005
RIS Rail Set for AAP-01 GBB Gas Pistols by Action Army in black. Top RIS rail with 10 slots and bottom rail with 6 slots. Compatible with all 21mm RIS / Picatinny accessories. Lightweight yet durable nylon construction. Designed exclusively for AAP-01 GBB.
9,21 €In Stock
