Orders for op. Kandahar closed!!!
No products
ARES058
: ARES
One of the latest M4 Amoeba Airsoft series with many interesting technical and design solutions.
The replica's receiver, buttstock and sights was made of strengthened nylon. Quality is so good that it can hardly be recognized whether it is plastic or metal. Metal was used to produced the outer barrel, the flash hider (14mm CW thread), the stock tube and some small pieces. The pistol grip is made of plastic, covered with scrabrous non-slip texture which improves grip and comfort. Interesting is the magazine release, which is enlarged - you will appreciate it by magazine quick-change. By pulling the double-sided bolt lever, the dust cap is opened and allowing access to the hop-up system control.
The replica has the tube-buttstock and it is suitable for small Li-Po 7,4V battery (recommended voltage is max 9,6V, higher battery voltage can cause damage to internal parts). It is adjustable to four position for a better fit. RIS rail on the upper side of the replica is devided, and another RIS rail is on the bottom side.
Hi-cap magazine for 300BB. Its interest is the PMAG pad for rapid pulling out of the magazine pouch, non-slip texture on the surface of the magazine and visually appealing transparent gaps on shells.
ECFS gearbox
Internally, this replica is among the most advanced airsoft weapons on the market. Metal gearbox with 8mm bearings and reinforced parts, quick-change spring (no need to disassamble the weapon, just remove the stock tube), powerful engine and last but not least the Electronic Firing Control System (EFCS). It is an electronic unit with MOSFET that prevents contact tanning, protects the battery, and makes it easy to set your shooting mode (Safe / Semi / 3rd burst / Auto). The EFCS setup is done by the Ares electronic programmer.
ARES
Manufacturer of premium Airsoft guns in the largest variety of models and styles. Based in Hong Kong, ARES has distribution partners globally including America, Europe, and Asia.
Named after the God of War, ARES strives to offer the largest selection of high quality Airsoft guns. Not a clone company, ARES products go through their own R&D process to come up with their own gearbox designs. ARES is also the pioneer for many models that did not previously exist in the Airsoft market, including the licensed TAVOR21, and many other unique models. ARES guns all shoot around 360-380fps and are designed to be upgradeable easily for maximum performance.
General info
Shooting mode | Semi and full auto |
Operation | Electric (AEG) |
Estimated performance (+/- 10%)
BB energy (J) | 1,55 |
Velocity (m/s) | 125 |
Velocity (fps) | 410 |
Theoretical range (m) | 56 |
Appropriate balls weight | 0,25g |
Outer specs.
Length (mm) | 660/730 |
Weight (g) | 2280 |
Material | Plastic |
Gunstock | ABS, metal tube |
Foregrip | metal |
Inner specs.
Inner barrel length | 290 mm |
Gearbox material | metal alloy |
Bearings | 8 mm ball bearing |
Gears | metal reinforced gears |
Piston | polycarbonate, full metal teeth |
Piston head | plastic |
Hop-up | ABS plastic, one piece, adjustable |
Magazine
Capacity | 300 |
Type of the magazine | High capacity winding magazine |
Battery
Suitable battery | Special |
Connector | Mini Tamiya |
Battery location | in stock |
Package contents
Battery | No |
Charger | No |
Magazine | Yes |
Color | Desert / Sand |
Muzzle velocity (m/s) | 125 (m/s) |
Thread (mm) | 14+ (mm) |
Length | 820 (mm) |
Outer length MINIMAL (mm) | 720 (mm) |
Outer length MAXIMAL (mm) | 820 (mm) |
Inner barrel length (mm) | 350 (mm) |
Weight (g) | 2400 (g) |
Body/receiver material | ABS / Plastic |
Amount of piston teeth | 14 |
Bearings (mm) | 8 (mm) |
Bearings (material) | Metal |
Hlava pístu | Plastic |
Nozzle | Plastic |
Spring guide | Plastic |
Hop-Up chamber material | Plastic |
Connector type | Small Tamyia |
Magazine material | Plastic |
High-cap / Mid-cap | High-cap |
Magazine capacity | 300 |
EM10001
Tokyo Marui Mid-Cap Magazine for AEG AR15 (M4/16) with a capacity of 68 rounds brings reliability and performance in one. Designed with emphasis on precision engineering and reliable feeding, as customary with Marui. The magazine is suitable for all weapons of the TM standard type. Indulge in a substantial dose of quality, treat yourself to Tokyo Marui!
EM10002
Tokyo Marui Hi-Cap Magazine for AEG AR15 (M4/16) with a capacity of 190 rounds brings reliability and performance in one. Designed with emphasis on precision engineering and reliable feeding, as customary with Marui. The magazine is suitable for all weapons of the TM standard type. Indulge in a substantial dose of quality, treat yourself to Tokyo Marui!
EM10003
Tokyo Marui Hi-Cap Magazine for AEG AR15 (M4/16) with a capacity of 300 rounds brings reliability and performance in one. Designed with emphasis on precision engineering and reliable feeding, as customary with Marui. The magazine is suitable for all weapons of the TM standard type. Indulge in a substantial dose of quality, treat yourself to Tokyo Marui!
EM10044
Tokyo Marui Mid-Cap Magazine for AEG AR15 (M4/16) with a capacity of 80 rounds brings reliability and performance in one. Designed with emphasis on precision engineering and reliable feeding, as customary with Marui. The magazine is suitable for all weapons of the TM standard type. Indulge in a substantial dose of quality, treat yourself to Tokyo Marui!
SPARMS029-BK
What's the point of a tuned rifle if it doesn't feed? Specna Arms introduces high-quality winding magazines S-MAG with a capacity of 380 BBs for AEG M4 (and similar), fitting into most weapons on the market. Thanks to the tuned feeding mechanism, they feed with higher ROF and heavier BBs. They are durable, lightweight with a narrow profile to avoid...
SPARMS029-DE
What's the point of a tuned rifle if it doesn't feed? Specna Arms introduces high-quality winding magazines S-MAG with a capacity of 380 BBs for AEG M4 (and similar), fitting into most weapons on the market.Thanks to the tuned feeding mechanism, they feed with higher ROF and heavier BBs.They are durable, lightweight with a narrow profile to avoid...
SPARMS029-GR
What's the point of a tuned rifle if it doesn't feed? Specna Arms introduces high-quality winding magazines S-MAG with a capacity of 380 BBs for AEG M4 (and similar), fitting into most weapons on the market.Thanks to the tuned feeding mechanism, they feed with higher ROF and heavier BBs.They are durable, lightweight with a narrow profile to avoid...
SPARMS030-GR
What's the point of a tuned rifles if it doesn't feed? Specna Arms introduces high-quality S-MAG spring feeding magazines for AEG M4 (and similar) that fit most weapons on the market. Thanks to a strong feeding spring, they feed even with higher rates of fire and heavier BBs. They are durable yet lightweight with a narrow profile to avoid interference in...
SPARMS030-BK
What's the point of a tuned rifles if it doesn't feed? Specna Arms introduces high-quality S-MAG spring feeding magazines for AEG M4 (and similar) that fit most weapons on the market.Thanks to a strong feeding spring, they feed even with higher rates of fire and heavier BBs.They are durable yet lightweight with a narrow profile to avoid interference in...
: G&P
GP00273
The G&P manufacturer, originally from Hong Kong, primarily focuses on replicas of the AR15 platform, both civilian, sports and military versions such as the M4 and similar. In their assortment we will also find other products such as machine guns, shotguns and rich accessories for your pets. G&P is based on the realistic appearance of replicas with...
: G&P
GP00285
The G&P brand specializes primarily in AR15 platform rifles. Other models include shotguns, machine guns, M14s and a large number of accessories. Above all, the brand prides itself on its precision craftsmanship, realistic appearance and long-standing presence on the market. It is no coincidence that the brand based its internal parts compatibility on the...