Orders wit delivery to EL PROTECTOR till 2.8.
No products
Internal parts and upgrade for airsoft Well MB01,4,5,8,14 and L96
Best Seller in Category
1.AirsoftPro CNC Hop-up Unit L96 / WELL MB-01 Gen3 – Red
2.AirsoftPro CNC Stainless Steel Cylinder Head for L96 (MB01) and M24
3.AirsoftPro Spare Piston O-ring L96 / M24 20 mm (2 pcs)
5,88 € 12,69 € In Stock-54%- 38,02 € In StockAirsoftPro CNC Hop-up Unit L96 / WELL MB-01 Gen3 – Red
ASPRO125
The AirsoftPro CNC Hop-Up Chamber for L96 / WELL MB-01 Gen3 Airsoft Sniper Rifles is a precision-machined upgrade chamber designed to improve air seal, shot-to-shot consistency, and shooting accuracy. Compared to the stock chamber, it offers compatibility with both original and AEG inner barrels and hop-up buckings, support for TDC installation, and...
38,02 €In Stock 
37,64 € In StockAirsoftPro Steel Cylinder for WELL L96 / MB01 Rifles – BlackASPRO186
The AirsoftPro Steel Cylinder for WELL L96 (MB01) Sniper Rifles in a black finish is a reinforced upgrade component designed for high-power builds using heavy-duty springs. Thanks to its fully welded steel construction, it withstands significantly higher stress than standard cylinders. The cylinder is compatible with WELL MB01 / MB05 / MB08 sniper rifles...
37,64 €In Stock
10,53 € 13,11 € In Stock-20%AirsoftPro CNC Aluminum Hop-up Chamber Lever WELL L96 / MB01ASPRO195
AirsoftPro CNC Aluminum Hop-Up Chamber Lever for WELL L96 / MB01 in a blue finish is a durable upgrade part designed to replace the original plastic arm. Thanks to its aluminum construction, it significantly increases the durability of the hop-up chamber and helps maintain reliable hop-up bucking pressure adjustment. A recommended upgrade when using...
10,53 € 13,11 €In StockReduced price!
16,87 € In StockAirsoftPro CNC Steel Guide Support L96 (MB01)ASPRO213
AirsoftPro steel spring guide support for L96 (MB01) / APS airsoft sniper rifles is a reinforced upgrade part designed for manual sniper rifles based on the APS system. It replaces the original alloy support and, thanks to its hardened CNC-machined steel construction, easily withstands even the strongest upgrade springs.
16,87 €In Stock
84,16 € In StockAirsoftPro CNC Trigger Box L96 / MB-01 Gen. 2ASPRO281
AirsoftPro CNC L96 Gen.2 trigger mechanism for WELL MB-01, MB-04, MB-05, and MB-08 airsoft sniper rifles is a reinforced upgrade part designed for APS-system spring-powered sniper rifles with a 90° piston sear. Featuring a CNC-machined aluminum body, hardened steel internal components, and a ball bearing trigger, it offers high durability with springs up...
84,16 €In Stock
14,76 € In StockAirsoftPro Steel Spring Guide with Bearing L96 / M24 – 7 / 9 mmASPRO308
The AirsoftPro 7 mm & 9 mm Rotating Steel Spring Guide with Bearing for L96 and M24 Rifles is a universal upgrade component for APS Type 96 airsoft sniper rifles. Thanks to its smart design, it supports both standard 7 mm and reinforced 9 mm springs. The integrated ball bearing allows the spring to rotate freely during compression and reducing friction.
14,76 €In Stock
29,18 € In StockAirsoftPro CNC Hybrid Piston L96 / MB01, SW M24, SW M99 RiflesASPRO365
AirsoftPro CNC hybrid piston for WELL L96 (MB-01), Snow Wolf M24 and M99-01 Barrett airsoft sniper rifles is an upgrade part designed to increase muzzle velocity. The combination of a lightweight aluminum body, stainless steel sear, and 2 POM guide rings provides excellent durability and smooth bolt operation.
29,18 €In Stock
32,10 € 50,11 € In Stock-36%AirsoftPro Upgrade Set for Rifles L96 / MB-01, SW M24 / M99ASPRO378
AirsoftPro upgrade set for L96 / WELL MB-01, Snow Wolf M24 and M99 Barrett airsoft sniper rifles includes everything needed to increase performance. The kit contains a lightweight hybrid piston, stainless steel spring guide with ball bearing, and an upgrade spring in the selected strength. These components provide better cylinder air seal, and smooth...
32,10 € 50,11 €In StockReduced price!
6,13 € In StockAirsoftPro Delrin Cylinder Guide Ring L96 / WELL MB-01ASPRO385
AirsoftPro cylinder guide ring for WELL MB-01 (L96), MB-04, MB-05, and MB-08 airsoft sniper rifles is a replacement part designed to ensure smooth cylinder operation. The Delrin (POM) guide ring reduces friction between the cylinder and receiver, provides smoother bolt operation, and helps reduce wear on moving parts.
6,13 €In Stock
18,57 € 31,72 € In Stock-41%AA CNC Aluminum Piston for L96 (90° Trigger) - RedB02-004
CNC Aluminum Piston L96 by Action Army in red finish. For bolt-action sniper rifles Maruzen Type 96 and clones (Well MB01, etc.). Version with 90° sear catch (original design). Durable upgrade piston with two Delrin guide rings. One-way vent holes to enhance performance.
18,57 € 31,72 €In StockReduced price!
1,65 € In StockAirsoftPro Piston Sear Spring Set for CNC Trigger Box (2 Pcs)ASPRO389
AirsoftPro piston sear spring set for CNC trigger box is an original set of 2 replacement springs designed to restore the proper function of the trigger mechanism. It includes both the left and right spring, ensuring reliable return of the piston sear to its original position and maintaining correct trigger operation.
1,65 €In Stock- 16,49 € In StockAirsoftPro CNC Stainless Steel Cylinder Head for L96 (MB01)...
ASPRO208
The AirsoftPro CNC stainless steel cylinder head for L96 (MB-01) and SW M24 airsoft sniper rifles is a durable upgrade component designed to improve the air seal of the compression system in manual sniper rifles. It is CNC-machined from a single piece of stainless steel and, thanks to its precision manufacturing, sealing O-ring, and integrated impact pad,...
16,49 €In Stock 
3,76 € In StockAirsoftPro Ball Bearing for Sniper Rifle Pins (7 mm)ASPRO096
AirsoftPro thrust ball bearing for spring guides in airsoft sniper rifles is an upgrade part designed to allow the spring to rotate more freely during compression. This reduces friction between the spring and the spring guide, making cocking smoother and allowing the spring to operate more efficiently. The steel thrust ball bearing is intended for...
3,76 €In Stock
3,38 € In StockAirsoftPro Impact Rubber for Sniper Rifle Cylinder HeadsASPRO285
AirsoftPro cylinder head impact pad for VSR, L96, M24, and SVD sniper rifles is an original replacement part designed to replace a worn or damaged impact pad on AirsoftPro cylinder heads. It absorbs piston impact during firing, protects the rifle's internal components, and helps extend the service life of both the cylinder and cylinder head.
3,38 €In Stock
2,92 € In StockAirsoftPro Sniper Rifle Piston Impact Rubber – 17.4mmASPRO286
AirsoftPro piston impact pad for sniper rifles, 17.4 mm diameter is an original replacement part designed to replace a worn or damaged piston bumper in spring-powered sniper rifles. It absorbs impact when the piston reaches the end of its travel, protects the rifle's internal components, and helps extend the service life of the piston.
2,92 €In Stock
14,34 € 23,26 € In Stock-38%AA CNC Steel Spring Guide with Bearing - L96 (7 mm)B02-003
Upgrade Steel Spring Guide with Bearing by Action Army in silver finish. For spring bolt-action sniper rifles Maruzen Type 96 and clones (Well MB01, etc.). Internal diameter of 7 mm. Durable 303 stainless steel construction suitable even for strong springs. Integrated bearing for smoother compression and easier cocking.
14,34 € 23,26 €In StockReduced price!
52,86 € In StockAA CNC Aluminum Hop-up Unit for L96 - BlueB02-009
CNC Aluminum Hop-Up Chamber for L96 by Action Army in blue. Compatible with Maruzen Type 96 and Well MB01 (L96) replicas. Precision pressure system for accurate long-range shots. Easily lifts heavy sniper BBs (0.36–0.49 g). Compatible with AEG-type inner barrels and buckings. Durable construction from CNC-machined aluminum.
52,86 €In Stock
116,26 € 186,08 € In Stock-38%AA CNC Enhanced Zero Trigger System L96 / MB01AA0001
CNC Zero Trigger Mechanism Type 96 by Action Army in black. Designed for sniper rifles Maruzen Type 96, WELL MB01 and clones. Maximum durability for high-powered upgrade springs. CNC-machined aluminum body with premium internal components. Compatible with 90° piston catch systems only.
116,26 € 186,08 €In StockReduced price!
11,00 € In StockAA L96 / MB01 Inner Barrel Spacer SetAA0005
Inner Barrel Spacers by Action Army in black. Designed for sniper rifles L96 such as Maruzen Type 96, Well MB01. CNC-machined centering rings made of POM material for improved shooting precision. Stabilize the inner barrel and eliminate vibrations during firing. Inner and outer O-rings for a secure fit.
11,00 €In Stock- 0,85 € In StockAirsoftPro Spare Piston O-ring L96 / M24 20 mm (2 pcs)
ASPRO424
AirsoftPro replacement piston O-ring for L96 / M24, 20 mm (2 pcs) is a set of sealing O-rings designed for manual airsoft sniper rifle pistons used in L96 (Type 96), MB-01, SW M24, TM AWS (L96). They provide reliable sealing between the piston and cylinder, helping maintain consistent rifle performance. The set includes 2 replacement O-rings manufactured...
0,85 €In Stock 
5,88 € In StockEPeS SorboPad Sniper L96 / M24 (20mm) - 60D - 3.5mm: EPES
E502-60D-100
EPeS Sorbopad Sniper is a magical upgrade for your airsoft sniper rifle with a 20 mm cylinder diameter. Designed for Well MB01 (L96), CA / SW M24, Novritsch SSG24 and SSG96. Hardness of 60 Duro (M130–M145), thickness of 3.5 mm. Significantly reduces the shot noise. Installs on the cylinder head (interior diameter 19.5 x 7 mm). Sorbopad – an piston...
5,88 €In Stock
6,30 € In StockEPeS SorboPad Sniper L96 / M24 (20mm) - 60D - 4.2mm: EPES
E502-60D-125
EPeS Sorbopad Sniper is a magical upgrade for your airsoft sniper rifle with a 20 mm cylinder diameter. Designed for Well MB01 (L96), CA / SW M24, Novritsch SSG24 and SSG96. Hardness of 60 Duro (M130–M145), thickness of 4.2 mm. Significantly reduces the shot noise. Installs on the cylinder head (interior diameter 19.5 x 7 mm). Sorbopad – an piston...
6,30 €In Stock
6,72 € In StockEPeS SorboPad Sniper L96 / M24 (20mm) - 60D - 5.8mm: EPES
E502-60D-188
EPeS Sorbopad Sniper is a magical upgrade for your airsoft sniper rifle with a 20 mm cylinder diameter. Designed for Well MB01 (L96), CA / SW M24, Novritsch SSG24 and SSG96. Hardness of 60 Duro (M130–M145), thickness of 5.8 mm. Significantly reduces the shot noise. Installs on the cylinder head (interior diameter 19.5 x 7 mm). Sorbopad – an piston...
6,72 €In Stock